: +8618066321396          :xuran1603@gmail.com           WhatsApp:+8618066321396
Raised Face Vs Flat Face Vs RTJ Flanges: Sealing Face Selection Guide
You are here: Home » News » Company News » Raised Face Vs Flat Face Vs RTJ Flanges: Sealing Face Selection Guide

Raised Face Vs Flat Face Vs RTJ Flanges: Sealing Face Selection Guide

Views: 0     Author: Site Editor     Publish Time: 2026-11-18      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Raised Face Vs Flat Face Vs RTJ Flanges: Sealing Face Selection Guide

Flange sealing face selection directly determines joint tightness, safety and service life of the whole piping system. Improper face type matching easily causes leakage, bolt overload or brittle equipment cracking. Raised Face (RF), Flat Face (FF) and Ring Type Joint (RTJ) are the three most mainstream sealing faces under ASME B16.5 standard, widely used in oil & gas, petrochemical, power, water treatment and offshore projects. This guide explains their structural principles, performance differences, gasket matching rules and industry selection suggestions, helping engineers and purchasers pick the correct flange face quickly.

1. Structure & Working Principle of Three Sealing Faces

Raised Face (RF)

RF flange has a circular raised sealing land around the pipe bore. When tightening bolts, bolt preload concentrates on this narrow raised ring, compressing the gasket to form a reliable seal. It is the universal standard flange face, covering most pressure classes from Class 150 to Class 2500. The raised height follows ASME standard: 1/16” for Class 150/300; 1/4” for Class 600 and above.

Flat Face (FF)

The entire flange plane is fully flat without any raised ridge. The gasket covers the full flange face including bolt holes (full-face gasket). Bolt load distributes evenly over the whole contact area, avoiding local concentrated pressure. The core purpose is mating with brittle equipment such as cast iron valves, FRP vessels and bronze housings, preventing brittle material crush and crack from point load.

Ring Type Joint (RTJ)

RTJ flange machines a precision trapezoidal groove on the sealing surface. An oval or octagonal solid metal ring gasket sits inside the groove. After bolt tightening, metal ring deforms slightly to realize metal-to-metal sealing. It features strong resistance to high pressure, high temperature and thermal cycling, suitable for critical hazardous media.

2. Performance Comparison Table

Item

Raised Face (RF)

Flat Face (FF)

Ring Type Joint (RTJ)

Typical Pressure Class

Class 150 ~ 2500

Class 150, rarely Class 300

Class 600 ~ 2500

Recommended Gasket

Sheet gasket, spiral wound, kammprofile

Non-metallic full-face sheet gasket

Octagonal / oval metal ring (304,316L,soft iron,Inconel)

Sealing Characteristic

Medium-high sealing performance, flexible gasket choice

Low pressure, uniform load distribution

Metal-to-metal, excellent anti-leakage under extreme condition

Suitable Media

Water, steam, oil, general corrosive fluid

Cooling water, air, low-pressure utility fluid

High-pressure hydrogen, sour gas, crude oil, superheated steam

Relative Cost

Moderate, cost-effective

Low

High (groove machining + alloy ring gasket)

Key Restriction

Do NOT mate RF steel flange directly to cast iron FF flange

Not for high pressure, narrow sealing load

High machining requirement; groove damage leads to total seal failure

3. Gasket Matching Recommendations

  • RF Flange: The most flexible option. Class150-300 can use non-asbestos sheet, PTFE or graphite composite gasket; Class600–1500 prefer spiral wound gasket with inner/outer ring; high-pressure heavy service can upgrade to RTJ structure. Gasket must be inside bolt circle, not full-face type.

  • FF Flange: Must adopt full-face gasket with pre-punched bolt holes. Rubber, fiber, EPDM sheet gaskets are common. Never use inner-ring limited gaskets, which will create concentrated load and crack cast iron equipment.

  • RTJ Flange: Only matched with standard metal ring gasket. Octagonal rings are more popular for better stability; oval rings are for old legacy groove designs. Material selection: soft iron for general oil-gas; 316L for corrosive medium; Inconel/Monel for high temperature & sour service.

4. Industry-by-industry Selection Advice

  • Water Treatment / HVAC / Cooling System: Priority FF when connecting cast iron pumps and valves; RF for stainless steel piping loops, Class150 is enough.

  • Petrochemical & Refinery: RF as baseline for most process pipelines (Class150~600). Switch to RTJ for high-pressure reactor outlet, hydrogen line, sour crude and toxic volatile medium.

  • Oil & Gas / Offshore Wellhead: RTJ is standard for Class600+, 1500#, 2500# wellhead, manifold and subsea piping, to resist pressure fluctuation and thermal shock.

  • Power Plant: RF for normal steam and water piping; RTJ for supercritical high-temperature steam joints.

  • Food & Sanitary Pipeline: Mostly RF with sanitary polished face, matched with PTFE or silicone gaskets. RTJ is seldom used in sanitary service.

5. How Sealing Surface Finish Affects Sealing Reliability

Surface roughness, tool marks and machining defects directly affect gasket contact.

  • RF: Standard serrated finish (concentric or spiral serrations) helps bite into soft/semi-metallic gaskets and improve anti-slip performance. Common Ra: 3.2μm ~ 6.3μm. Too smooth will cause gasket slip; too rough scratches gasket and causes leakage path.

  • FF: Smooth uniform finish without sharp ridges, to protect brittle mating flange and full-face soft gasket.

  • RTJ: Groove sidewall needs ultra-precise machining. Scratches, dent or out-of-tolerance groove dimension will stop metal ring from fully seating, resulting in permanent leakage risk. RTJ groove is non-repairable once severely damaged.

Surface polishing & finishing is a critical control point in our workshop. We provide sanitary mirror polishing, serrated sealing face machining and RTJ groove precision turning for stainless steel 304 / 316L / duplex and alloy flanges.

6. Custom Flange With All Sealing Faces | Working Condition Consultation

We are a professional stainless steel flange & pipe fitting source manufacturer. We produce RF, FF and RTJ flanges strictly following ASME B16.5, DIN, EN standards, available in 304, 316L, duplex steel, Inconel, Monel and other alloy grades. ✅ Custom sealing face dimension, serration, Ra roughness ✅ Sanitary mirror polishing, electrolytic polishing service ✅ Complete pressure classes: Class150,300,600,900,1500,2500 ✅ Support pre-production sample inspection and third-party NDT If you are unsure which sealing face fits your piping medium, pressure and temperature, send your P&ID or specification sheet to us. Our engineering team will give professional flange & gasket matching proposal.

SDFL supplies stainless steel weld neck flanges and custom flange manufacturing. Providing the pipe specification and required weld-end drawing helps establish the intended bore before production.If you are looking for a supplier of flanges and pipe fittings, feel free to contact me anytime

Related News
Telephone
+86-180-6632-1396

Quick Links

Products

+8618969712218Contact Info

 
WhatsApp:+8618066321396
Tel: +86-18066321396
E-mail:xuran1603@gmail.com  
Address: No. 505, Binhai 2nd Road, Binhai Industrial Park, Longwan District, Wenzhou City, Zhejiang Province, China

Subscribe To Our Newsletter

Promotions, new products and sales. Directly to your inbox.
​Copyright © 2025 Shangdian Flange Pipe Fittings Co., Ltd. All Rights Reserved. | Sitemap